Estun Summa Series - Chapter 9 Tuning; IF (Intermediate Frequency) Vibration Suppression; Load Oscillation Suppression

Summa Series Servodrive Product Manual
Basic Settings
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
4-24
Figure 4-22 Select a device type
Step 5 The created device will be displayed in the Device list on the left of the ESView V4 main windows.
Figure 4-23 Offline device in the list
NOTE

Since there is no online connection to a Drive, the functions that you can
use are restricted.

The Device list can display all the device you had connected or created
(including online and offline), and their basic status.
If you want to delete a device from the Device list, click in the top
right, and then click OK on the pop-up warning box.
4.2.3 Edit Parameters
You can fulfill the following functions in Edit Parameters window.
 Upload Parameters
 Modify Parameters
 Search Parameters
 Download Parameters
 Restore Parameters
 Save Parameters
Follow the below procedure to open the Edit Parameters window.
Step 1 Select Parameters > Edit Parameters in the Menu Bar of the ESView V4 main windows.