Estun Summa Series - Chapter 9 Tuning; Control Block Diagram; Tuning Process

Summa Series Servodrive Product Manual
Basic Settings
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
4-15
4.2 ESView V4
4.2.1 Installation
System Requirements
You need to provide for your own personal computer that meets the following basic hardware
requirements.
Item
Description
OS
Windows 7 (32-bit or 64-bit)
Windows 10 (32-bit or 64-bit)
English (US), Chinese (Simply) version of the OS above.
CPU
1.6 GHz processor or more
Memory
System memory of 1 GB or more
Graphics memory of 64 MB or more
Hard Disk
Free space of 1GB or more
Communication
USB; RJ45
Display
1,024×768 PIXEL or more
24bit color (TrueColor) or more
Preparation
Please prepare the Windows operating system, communication cable, and a decompression software in
advance.
Visit ESTUN official website www.estun.com to find and download ESView V4 on Technical Support >
Download for getting the compressed file. For help, please contact ESTUN.
 Turn on the power supply of PC and start Windows. (Close down other software running.)
 Copy ESView V4 compressed file into an appropriate folder.
 Disconnect if the Drive is connected to the PC with the cable.
Install Software
Close other running software before installing the software and confirm that the Windows user has
administrator privileges.
Step 1 Extract the ESView V4 compressed file in an appropriate directory of your PC.
Step 2 Double click the ESView V4 installation program.
The installation program will automatically start, as shown in the Figure 4-3.