Operation & Software Manual
44
Direct Drives & Systems
Chapter B: System setup & tuning ETEL Doc. - Operation & Software Manual # DSC2P 903 / Ver. F / 3/6/05
8.2.1 Tools menu
If you click on Tools in the menu bar (in the Main Menu
window, or in other tools), you will first see all basic
tools (Main Menu refer to §8.2
, Scope tool refer to
§8.4
, Terminal tool refer to §8.5, Editor tool refer to
§8.6
, Drive Setting tool refer to §8.3, Unit Converter
tool refer to §8.7
).
The MultiScope and all the tools listed under
Advanced are reserved to experienced users only!
Some tools may be opened several instances
simultaneously. They are listed under New:
To Next Page
Loading...
Need help?
General
