EVOCA Opera Touch - Boiler Parameters Adjustment

02-2023 6095 00 41
To move an ingredient before or after an-
other ingredient, just drag the bar of the
ingredient.
LLLLLLLLLLL
LLLLL
Fig. 36
After changing the parameters, save the
settings and go back to the main screen
page.
From the main screen page with “Test
recipe” you can dispense a test selection to
check the recipe you have modied.
basic paramEtErs for coffEE bEaNs
You can set up:
-the name of the ingredient
-the water dose
-dispense a test drink
Some customisations can be added (e.g.
strength, total water quantity …).
Every single customisation has some spe-
cic parameters for the setup.
You can set the price variation of the se-
lection for the equipment with a payment
system.
basic paramEtErs for iNstaNt proDucts
You can set up:
-the name of the ingredient
-the water dose
-the instant powder dose
-dispense a test drink
Some customisations can be added (e.g.
strength, total water quantity …).
Every single customisation has some spe-
cic parameters for the setup.
You can set the price variation of the se-
lection for the equipment with a payment
system.
basic paramEtErs for syrups
For models with a syrup kit only.
You can set up the syrup quantity to be dis-
pensed with the drink.
Syrups are considered to be pre-selections.
aDvaNcED EsprEsso paramEtErs
iNitial DElay
To set up a delay for the ingredient; the de-
lay is useful if you create a recipe consist-
ing of several ingredients.
For example, on creating the recipe “Es-
presso with milk”, you can set up a delay
time between the espresso dispensing
cycle and the milk dispensing one.
It may be of use to obtain a better drink
quality.
DosE squEEziNg
The dose is squeezed by the upper piston
that helps removing water from the dose
before discharge in the solid waste tray by
mechanically compressing the dose.
-ON: dose squeezing enabled
-OFF: no dose squeezing
prE-brEw DosE
To set up the water quantity for use during
pre-brewing.
prE-brEw timE
To set up the pre-brew time before actual
brewing occurs.
DosE comprEssioN
To set up the dose compression level while
brewing coee beans:
-Medium
-Low