EVOCA Opera Touch - Page 65

02-2023 6095 00 57
rEturNED
Used to dene which coins shall be used to
give the change among those available in
the tubes. This parameter is active only with
the coin mechanisms not intended to man-
age the choice of the tube in use automati-
cally (Auto changer payout).
For the coin/value correspondence check
the coin mechanism conguration.
vEND tokEN valuE
No parameter can be modied
Exact cHaNgE sEttiNgs
To choose the control algorithm to enable
the machine to give the change at the end
of the selection.
Every single algorithm checks a series of
requirements (the amount of coins in the
tubes or the empty or full state) of the tubes
the coin mechanism will use to give the
change.
The "No change" condition occurs when
the tubes assigned to the chosen algorithm
have achieved the minimum level of coins.
For reasons of simplicity, the combination
is described with reference to tubes A, B
and C, where tube A will receive the lowest-
value coins and tube C the highest-value
coins.
0 = A or (B and C)
1 = A and B and C
2 = A and B only
3 = A and (B or C)
4 = A only
5 = A or B only (default)
6 = A or B or C
7 = A or B only
8 = A or C only
9 = B and C only
10 = B only
11 = B or C only
12 = C only
For example: if the algorithm is set to “6”,
the machine will display the "No change"
message when one of the tubes (A, B, C)
has achieved the minimum level.
If the algorithm is set to “04”, the machine
will display the “No change” message
only when tube A (lowest-value coin) has
achieved the minimum level of coins.
casHlEss sEttiNgs
casHlEss privatE
To protect the users’ privacy, this function is
intended to display “-----” in the place of the
credit on the cashless system.
NoN-DEfiNED crEDit accEptaNcE
This function is intended to accept cash-
less payment systems (key or card) or not if
the cashless system credit is not dened.
casH salE ENablE
To enable / disable the cash sale function.
casH salE
To give evidence that cash transactions
have occurred by means of a cashless
system.
The values available are listed here below:
-0: cash transactions are recorded as such
(standard operation)
-1: cash transactions are recorded as
transactions performed by the first cash-
less system
-2: cash transactions are recorded as
transactions performed by the second
cashless system
rEvaluE
To enable / disable the bill reader only to
recharge the credit on the cashless system
(key or card).
systEm iNformatioN
To dene in the MDB payment system how
many text lines are made available for mes-
sages (max. 2, min. 0)
sEcoND casHlEss DEvicE
To enable / disable the operation of a sec-
ond cashless system.
DEactivatE first casHlEss
To enable / disable the operation of the rst
cashless system.