EVOCA Opera Touch - Page 66

58 02-2023 6095 00
cHEck casHlEss
To display the state of the cashless pay-
ment systems connected with the equip-
ment (inactive, not connected, …)
bill valiDator
casHlEss rEcHargE witH bills
To enable / disable the possibility of re-
charging cashless systems (key or card) by
means of a validator or bill reader.
bill Escrow positioN
If the bill validator supports this functional-
ity, when enabled, the bill can be returned if
dispensing fails.
When the function is disabled, if the se-
lection fails, the corresponding amount in
coins is returned, but not the bill.
mDb sEtup for bills
accEptED
Used to dene which bills shall be accept-
ed among those recognised by the reader.
For the bill/value correspondence check
the reader conguration.
Exact cHaNgE accEptED
Used to dene which bills shall be accept-
ed among those recognised by the reader
when the machine is in the “exact amount”
mode.
For the bill/value correspondence check
the reader conguration.
pricEs
currENcy symbol
The function is used to set up the currency
symbol during the credit and price display.
salEs pricEs
The machine (according to the payment
system) can manage up to 4 dierent
global prices for selections, promotions, up-
selling products, coee to go products, ...
Prices (single and global) can be active
according to the (standard or promotional)
time band you have set up.
Prices are grouped into 4 lists.
For each one of the 4 lists, you can set up
the price globally (the same for all selec-
tions) and individually (for every single
selection).
frEE vEND passworD
If any.
To enable / disable the free dispensing
cycle of one or more than one selection by
means of a password.
Set up:
-the password for one single free dispens-
ing cycle
or
-the password for the free dispensing cycle
of several selections.