72 02-2023 6095 00
clEaNiNg proDuct caNistErs
Act as follows:
1. remove the canisters from the machine;
2. disassemble the product outlet ports and
extract the scrolls from the rear side of
the canister;
3. clean all the parts by using a solution of
hot water and sanitising products. Dry
the parts carefully.
2
3
4
5
8
7
6
Fig. 45
1. Powder port
2. Instant powder canister
3. Pin for toothed wheel
4. Scroll
5. Toothed wheel
6. Scraper
7. Canister extension (some models)
8. Canister cover
To Next Page
Loading...
