EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
53
F9:CONNECT
This option calls the CONNECT window. This window allows the operator to
connect to the clips and record trains of other machine on the network.
The following functions can be used in the CONNECT window:
ALT+L: return to LOCAL mode and close the CONNECT window
ALT+C: CLIPS mode - to connect to the clips of a remote machine
ALT+R: RECORD mode - to connect to the record trains of a remote machine
ALT+P: CLIP+REC mode - to connect to the clips and record trains of a
remote machine.
After selecting CLIP, RECORD or CLIP+REC mode either with the keyboard
or by clicking with the stylus, select the machine you want to connect to:
click on it with the stylus, or move with the arrow keys and press ENTER on
the keyboard.
Pressing ALT+L or clicking with the stylus on “LOCAL” will close the
CONNECT window and return to local clips and record trains.
To close the CONNECT window without changing the connection mode or
remote machine, press ESC.
The “*” next to one of the machine in the list indicates which machine is the
active network server. Refer to the Chapter 13 ‘Operating on XNet Network’,
o
n page 139 for details.
F0:PLAYLIST
The Playlist screen can be accessed by selecting F10 on the keyboard.
To Next Page
Loading...
Need help?
General
