Extron electronics DTP CrossPoint 84 - Page 143

DTP CrossPoint 84 Series Matrix Switchers • HTML Operation 135
11
1111
1111
1111
1111
11
1111
1111
1111
1111
22
2222
2222
2222
2222
Figure 80. Updating Firmware
6. Navigate to the folder where you saved the firmware upgrade file. Select the file and
click Open (see figure 80,
1
). The Firmware Update dialog box returns to the top.
7. Click Upload (
2
). The switcher reports Uploading, Initializing, Installing, and
Rebooting. this process may take 6 to 8 minutes. After the reboot is complete, the
display returns to the default HTML page (see figure77 on page132).
NOTE: If the default HTML page does not display after 10 minutes, close the web
browser and reopen.
76