10 Eyecon 9420 & 9430 Instruction Manual
General information and warnings
1.3 Sharp objects
Do not use sharp objects such as screwdrivers or long fingernails to operate the
touchscreen.
1.4 Training
Do not attempt to operate or complete any procedure on the Eyecon unless you have
received the appropriate training or read this Instruction Manual.
To avoid the risk of RSI (Repetitive Strain Injury), place the machine on a surface which
is ergonomically satisfactory to the user. Take frequent breaks during prolonged usage.
1.5 Warranty policy
Avery Weigh-Tronix warrants its products to be free from defects in material and
workmanship for a period of two (2) years from the original date of purchase. Standard
"Terms and Conditions of Sale" apply.
Factory parts and labor are provided at no charge for up to two full years from the
original date of purchase.
The obligation of Avery Weigh-Tronix is limited to repairing or replacing equipment and
components that, upon inspection, testing and verification by Avery Weigh-Tronix are
found defective. Avery Weigh-Tronix extends this warranty only upon proper
installation and use of the equipment in the application for which it was intended and
does not warranty equipment that has been subject to any of the following conditions:
l Alterations, misuse or unusual physical or electrical stress beyond the
written specifications of that equipment.
l Exposure of electronic components to Electrostatic Discharge (ESD)
resulting from improper handling or installation.
l Damage caused by freight carriers, negligence, fire, flood or other natural
disaster.
In the event equipment is repaired or replaced under the terms of the warranty, the
warranty of the repaired or replaced equipment is limited to the remaining portion of the
original warranty period or 90 days, whichever is greater.
Avery Weigh-Tronix is responsible for repair, replacement or, at the sole discretion of
Avery Weigh-Tronix, credit of nonconforming equipment under the conditions and
terms of this warranty. Avery Weigh-Tronix is not liable for the cost of repairs, on-site
labor or any travel-related expenses performed by another party unless otherwise
agreed in writing.
Transportation charges for material shipped to Avery Weigh-Tronix for warranty repair
is paid by the shipper. Avery Weigh-Tronix will pay the transportation charges, via
standard carrier, for the return of items repaired or replaced under warranty. Failure to
handle and ship equipment correctly will void the warranty on that equipment.
The sole remedy under this warranty is to repair, replace or provide credit for equipment
at the sole discretion of Avery Weigh-Tronix. Avery Weigh-Tronix is not liable for
expenses either direct or consequential that arise from the use of or inability to use the
product. Avery Weigh-Tronix is not responsible or liable for losses, injury, or property
damage due to the installation or failure of the product.
To Next Page
Loading...
