Eyecon 9420 & 9430 Instruction Manual 33
3.3 Barcode menu
3.2.10 Select Language
The Eyecon supports both English and French.
You can change the language from the General
menu by tapping Language and choosing either
ENGLISH or FRANCAIS followed by OK. All
displayed prompts and menus will be shown in
the selected language upon exiting SETUP.
3.2.11 Select Country
This option allows you to choose the US or
Canada. From the General menu, tap Country.
Then choose the country where the Eyecon will
operate. Tap OK to accept and return to the
previous screen.
This completes the General menu.
3.3 Barcode menu
Access this to set the barcode type. Depending on which type you choose, Validation or PMSS, a different
set of choices appears in the right hand screen. Each is explained below.
3.3.1 Barcode Type
Tap Barcode Type at the top of the right hand screen and select a method of Rx filling;
Validation or PMSS. Tap your choice and press OK to accept the change or Cancel to
abort a change. Display returns to the Barcode menu.
List of items if Validation is selected.
List of items if PMSS is selected.
To Next Page
Loading...
