Eyecon 9430 - Chapter 1 General Information and Warnings; About this Manual; Text Conventions; Special Messages

8 Eyecon 9420 & 9430 Instruction Manual
General information and warnings
1 General information and warnings
1.1 About this manual
This manual is divided into chapters by the chapter number and the large text at the top
of a page. Subsections are labeled as shown by the 1 and 1.1 headings shown above.
The names of the chapter and the next subsection level appear at the top of alternating
pages of the manual to remind you of where you are in the manual. The manual name
and page numbers appear at the bottom of the pages.
The first 9 chapters apply to both the 9420 and 9430 Eyecon Models. Features unique
to the 9430 model are detailed in chapter 10.
1.1.1 Text conventions
The buttons used to interface with the Eyecon are via the touch screen display. The
buttons are shown in bold letters and reflect the case of the displayed button.
Screen headings will appear in bold italic (i.e. START) and reflect the case of the
displayed heading.
Displayed messages appear in italic type and reflect the case of the displayed
message.
1.1.2 Special messages
Examples of special messages you will see in this manual are defined below. The
signal words have specific meanings to alert you to additional information or the relative
level of hazard.
DANGER!
THIS IS A DANGER SYMBOL.
DANGER MEANS THAT FAILURE TO FOLLOW SPECIFIC PRACTICES
OR PROCEDURES WILL CAUSE INJURY OR DEATH.
CAUTION!
This is a Caution symbol.
Cautions give information about procedures that, if not observed, could result
in damage to equipment or corruption to and loss of data.
NOTE: This is a Note symbol. Notes give additional and important information, hints
and tips that help you to use your product.