RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 11
Table of Contents
How to use the manual _________________________________________________________________3
Safety Messages (review carefully)________________________________________________________4
Pro-LX Laminating Card Printer/Encoder Overview __________________________________________5
Reviewing Pro-LX Block Diagram _____________________________________________________5
Reviewing Pro-LX Boot Up Sequence __________________________________________________6
Reviewing Pro-LX Sequence of Operations_______________________________________________7
Section 1: Specifications________________________________________________________ 15
Regulatory Compliances _______________________________________________________________15
Agency Listings______________________________________________________________________16
Technical Specifications _______________________________________________________________16
Functional Specifications ______________________________________________________________19
Printer Components: Top Cover to Power Port___________________________________________20
Printer Components: Centronics-Type Parallel Interface ___________________________________24
Printer Components: Print Ribbons____________________________________________________25
Printer Components: Resin-Only Print Ribbons __________________________________________26
Printer Components: Dye-Sublimation-Only Print Ribbons _________________________________27
Printer Components: Blank Cards _____________________________________________________29
Reviewing the upgraded 81754 PVC Cards ______________________________________________31
Printer Components: Laminator ______________________________________________________33
Visual Security Solutions (Specifications) _________________________________________________34
VeriMarkTM Cards - 2-D holographic foil application _____________________________________34
Custom HoloMarkTM Cards _________________________________________________________34
Visual Security - Card Stock Part Numbers ______________________________________________34
Visual Security - Fargo Certified Overlaminates (Special Order in 50 quantity minimum)__________34
Visual Security Card Stock - Tolerances ________________________________________________35
VeriMarkTM - Application Specifications_______________________________________________35
HoloMarkTM and Custom HoloMarkTM - Application Specifications ________________________35
Section 2: General Troubleshooting______________________________________________ 36
LCD/SmartGuard Messages ____________________________________________________________36
Reviewing the Top Line LCD Messages ________________________________________________36
Reviewing the Bottom Line LCD Error / Status Messages __________________________________40
Communications Errors________________________________________________________________43
Resolving the Communication Errors___________________________________________________43
Card Feeding Errors __________________________________________________________________46
Resolving the Card Feeding Errors_____________________________________________________46
Resolving the Flipper Jam Error Message _______________________________________________48
Print Process Errors___________________________________________________________________49
Resolving the Headlift Error Message __________________________________________________49
Resolving the Cover Open Error Message _______________________________________________50
Resolving the Blank Output issues_____________________________________________________51
Card Jam Errors______________________________________________________________________53
Resolving the Card Jam: Print Error Message____________________________________________53
Resolving the Card Jam: Mag Error / Smart Error Message _________________________________54
Resolving the Card Jam: Lam Error Message ____________________________________________55
Resolving the Card Jam: Flip Error Message_____________________________________________56
Ribbon Errors _______________________________________________________________________57
Resolving the Lam Error/Out Error Message_____________________________________________57
Resolving the Skipping Ribbon Panel issues _____________________________________________59
Resolving the Wrong Ribbon error (being displayed incorrectly) _____________________________62
Resolving the Ribbon Low Message ___________________________________________________63
Resolving the Ribbon Breaking issues __________________________________________________64
Resolving the Lamination (not adhering to the card surface) problem__________________________67
To Next Page
Loading...
