FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder - Interfacing Information; Reviewing the Pin Assignments

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 93
Interfacing Information
The Printer is equipped with a standard 8-bit Centronics-type Parallel Data Communications
Port. (Note: The Printer's Parallel Interface Connector is a standard 36-pin Amp type with
two metal-wire retaining clips. It mates with a standard PC to Printer parallel cable.)
Caution: For best results, keep the Interface Cable to less than six (6) feet.
Reviewing the Pin Assignments
WIRE DIAGRAM
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
32 15
31 16
36
36
18
17
19 Through 30
19 Through 25
Shell Shell
DB36P
19
PIN 1
PIN 1
DB25P
14
13
25