FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder - Section 5: Packing the Pro-LX Card Printer

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 194
Section 5: Packing the Pro-LX Card Printer
The purpose of this section to provide the User with a specific packing procedure for the Pro-
LX Card Printer.
Follow this instruction to pack the Card Printer for transport.
Step Procedure
1 Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
cloth.
2 Clean the Printhead with a Printhead pen.
3 Pack the Printer in the original carton and packing materials.
4 Be sure to enclose any necessary paperwork, test cards, etc.