FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder - Selecting the Undefined Area(S) Option

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 163
Selecting the Undefined Area(s) option
Step Procedure
1
Select the Undefined Area(s) option for the Printer Driver to print the resin black
(K) panel for all black found only in the space outside the defined areas. (Note:
In the card grid, black indicates the area in which the resin black (K) panel will be
printed.)