FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder - Resolving Data Intended for the Magnetic Stripe (Being Printed on the Card) Problem

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 72
Resolving data intended for the Magnetic Stripe (being printed on
the card) problem
Step Procedure
1 Confirm that the application is formatting the magnetic string correctly. See the
Using the Magnetic Track Selection option procedure in Section 3, page 121.
2
a. Use WordPad (a Windows 95/ 98/ ME/ NT/ 2000/XP word processing
program in the Accessories Program Group).
b. Go to the File menu and select Page Setup.
c. Click on the Printer button and select the Pro-LX Card Printer.
d. Click OK and reset all four margins to zero.
(Note: WordPad will automatically replace the values with it’s minimum margins.)
e. Open the program and type: “~1%JULIEANDERSON^1234567890?” then,
go to File on the menu bar and select Print. (Note: The Printer should then
feed a card into the Encoder and magnetically encode it.)