FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder - Selecting the Split 1 Set of Ribbon Panels Checkbox

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 178
Selecting the Split 1 Set of Ribbon Panels checkbox
Use this option to automatically print full-color on the front of a card and resin black on the
back of a card using any of the Full-Color YMC+K Print Ribbon types.
Step Procedure
1 Select this option to use the most economical means of printing a dual-sided
card since a single set of ribbon panels is essentially split to print both the front
and back sides of a card.
 If using a YMCKO ribbon type, the front of the card is printed with the
ribbon's YMCO panels and the back is printed with the K panel.
 If using a YMCKOK ribbon type, the front of the card is printed with the
YMCKO panels and the back is printed with the second K panel.
 If using a YMCKK ribbon type, the front of the card is printed with the YMCK
panels and the back is printed with the second K panel.
(Note #1: This option is automatically enabled when the either the YMCKOK or
YMCKK ribbon type is selected.)
(Note #2: The Print Both Sides option is automatically enabled when this option
is selected.)