RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 77
Resolving the Ribbon Wrinkle problems
Symptom: Printed cards have off-colored lines or streaks on them.
Step Procedure
1 Confirm that the Printer is using the most current driver via: http://www.fargo.com
2
Reduce the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See Using the Image Color tab procedure in Section 3, page 157.
Continued on the next page
To Next Page
Loading...
