RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 180
Selecting the Print Back Side Only checkbox
Select this option to conveniently print the backside of preprinted cards, which also must
have their Magnetic Stripe or smart card chip encoded.
Selecting the Rotate Front 180 Degrees checkbox
Select this option to change the position of the printed image in relation to the set location of
a card's Magnetic Stripe or smart chip.
Selecting the Rotate Back 180 Degrees checkbox
Select this option to change the position of the printed image in relation to the set location of
a card's Magnetic Stripe or smart chip.
To Next Page
Loading...
