RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 121
Using the Coercivity option
Use the Coercivity option to select the type of Magnetic Stripe to encode.
Step Procedure
1 Select High Co to set the Oersted level to 2750
OR
Select Low Co to set the Oersted Level to 300.
Using the Magnetic Track Selection option
Use the Magnetic Track Selection option to specify which Track to configure through the
Magnetic Track Options if the application requires customization of the standard ISO
encoding process.
(Note: Although the default ISO Magnetic Track Options should be correct for almost all
applications, these options can be customized if the application requires it.)
Continued on the next page
To Next Page
Loading...
