RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 75
Resolving the Incorrect Image Darkness problems
Symptom: Printed cards are too dark or too light.
Step Procedure
1 Run a self-test to identify problems with the driver settings. See Running the Self
Test in Section 2, page 87.
2
Adjust the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See Using the Image Color tab procedure in Section 3, page 157.
Continued on the next page
To Next Page
Loading...
