FARGO electronics Pro-LX Pro-LX Laminating Card Printer/Encoder - Page 28

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 28
Printer Components: Dye-Sublimation-Only Print Ribbons (continued)
Type Description
Full-Color
(YMCKO)
(provides 250
prints)
This ribbon is used to print full-color photo ID cards along with resin black
text and bar codes. Both infrared and visible-light bar code scanners can
read bar codes printed with resin black.
An overlay panel (O) is included to protect the full-color dye-sublimation
printing.
Full-Color
(YMCKOK)
(provides 250
prints)
This ribbon is used for dual-sided printing. By supplying two resin black
panels, this ribbon used to print full-color with resin black on one side and
resin black-only on the other, without wasting an entirely new set of
ribbon panels for the black-only side.
An overlay panel (O) is also included to protect the side of the card with
full-color dye-sublimation printing. No overlay is necessary for the resin
black-only side. Both infrared and visible-light bar code scanners can
read bar codes printed with resin black.
Full-Color
(YMCKK)
(provides 250
prints)
This ribbon is intended to be used for dual-sided printing. By supplying
two resin black panels, this ribbon lets you print full-color with resin black
on one side and resin black-only on the other, without wasting an entirely
new set of ribbon panels for the black-only side.
Since no overlay panel is included, this ribbon must be used in
conjunction with the Printer's overlaminate feature. No overlaminate is
necessary for the resin black-only side. Both infrared and visible-light bar
code scanners can read bar codes printed with resin black.