Fike FCP-300 - Page 88

88 FCP-300/FCP-300ECS Manual — P/N LS10145-002FK-E:A 3/12/2021
Programming Overview Programming Menu Quick Reference
Point
(cont.)
Internal Power and
External Power
Enter Pt /Select Function
Select
Sensor
UNUSED
Section 9.5
B NOTIF
NOTIF OUTPUT
Select Group
Super-vised
Yes or No
CONTROL
CIRCUIT
A NOTIF
NOTIF OUTPUT
Select Group
Super-vised
Yes or No
CONTROL
CIRCUIT
AUX PWR
CON-STANT
AUX RESET
AUX DOOR
AUX SYNC
9
B SWITCH
MANUAL PULL
Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2, System
AUX1, System AUX2., ECS INPUT,
ECS TAMPER, and ECS
SUPERVISORY.
WATER-FLOW
FIRE SUPER-
VISORY
FIRE TAMPER
FIRE
DRILL
SILENCE
RESET
P.A.S. ACK
ZONE
AUX 1
B SWITCH
ZONE AUX2 Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2, System
AUX1, System AUX2., ECS INPUT,
ECS TAMPER, and ECS
SUPERVISORY.
System AUX1
System AUX2
MANUAL
RELEASE
INTER-LOCK
ECS INPUT
If ECS INPUT is selected choose
associated EVENT
Menu Options/Defaults Comments
Table 8.4 Programming Quick Reference Chart (Continued)