Fike FCP-300 - Page 89

Programming Menu Quick Reference Programming Overview
FCP-300/FCP-300ECS Manual — P/N LS10145-002FK-E:A 3/12/2021 89
Point
(cont.)
Internal Power and
External Power
(cont.)
Enter Pt /Select Function (cont.)
Select
Sensor
B SWITCH
ECS TAMPER Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2, System
AUX1, System AUX2., ECS INPUT,
ECS TAMPER, and ECS
SUPERVISORY
ECS SUPER-
VISORY
STATUS POINT
A SWITCH Same as B SWITCH
Section 9.5.3
B
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
A
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
Select Group or Zone Number
Group or Zone selection will appear
depending on the function selected
Edit Name Enter Name
FIK-5880/
FIK-5865/
FIK-Series
Amplifiers
Enter Point #
UNUSED
Section 9.5.4 and Section 9.5.6
NOTIF
Select Group
Edit Name Enter Name
FIK-5496 Edit Point #
UNUSED
Section 9.5.5
B NOTIF
Control Circuit
Notif Output
Select Group
Super-vised
Yes or No
A NOTIF
AUX_PWR
Constant
Edit Name
Aux Sync
Aux Door
Aux Reset
FIK-RVM/
FIK-ECS/
FIK-NVCM
Enter Pt /Select Function
UNUSED
Section 9.5.7
SWITCH
MANUAL PULL
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
System AUX1
System AUX2
Point
(cont.)
FIK-RVM/
FIK-ECS/
FIK-NVCM
Enter Pt /Select Function
SWITCH
MANUAL RELEASE
Section 9.5.7
INTERLOCK
STATUS POINT
ECS INPUT
ECS TAMPER
ECS SUPERVISORY
VOICE AUX STATUS 1-2
BACKGROUND MUSIC
VOICE AUX ECS 1-4
Menu Options/Defaults Comments
Table 8.4 Programming Quick Reference Chart (Continued)