Data transfer
49
MMS
®
Inspection DPM High
Transferring climatic values during the measurement to a CAQ system
► Measure, record your climatic values. The climatic values are transferred
to the CAQ program during the measurement.
Note that only the values stored via the hold function or log function are
transmitted.
To end the measurement
► CAQ program (PC): Disconnect the gage.
Mixing measured readings
As long as you have not finished the online measurement in the CAQ program,
you can transfer climatic values from measurements with different batches to
the open CAQ measurement file!
► Finish the online measurement in the CAQ program before you take
another online measurement with a different batch!
► Transfer the climatic values per batch into separate CAQ measurement
files.
What you can do next
View the batch statistics, the Measurement view is open: Main menu ( )
> Statistics > OK; see also page 33.
Delete all climatic values stored in the open batch, the Measurement view
is open:
> All Readings > OK > .
Transferring all climatic values from the open batch to the CAQ system
► Gage – Start the data transfer in the Statistics view: Main menu ( ) >
Statistics > OK > > Export Batch > OK.
The climatic values are transferred to the CAQ program.
What you can do next
View the batch statistics: 1x ; see also page 33..
Delete all climatic values stored in the open batch of the gage: 3x >
> > All Readings > OK > .
Go to the Measurement view: 3x > , measure, see page 46.
To Next Page
Loading...
