Data transfer
51
MMS
®
Inspection DPM High
a Activate the data export via Bluetooth:
Main menu ( ) > Gage Settings > OK > Data Transfer > OK > PcDatex
> OK > Bluetooth Classic > OK > Block Separator> OK > PC-DATEX >
OK > Start Pairing > OK.
Parameter is activated:
Bluetooth connection PC – gage is coupled:
b Go to the Measurement view: 3 x > .
2. Establish the Bluetooth device pairing between your PC and the gage (MMS
Inspection)
► Open your Bluetooth program/App and add the MMS inspection gage
as a new gage or refresh the connection (
Bluetooth program/App
on the PC).
3. Settings in the PC-Datex, MS Excel
a Open office program MS Excel on your PC.
b Set the used COM interface (e.g. COM20), to which the gage is
connected: double click on Port of the Settings menu in the PcDatex tab.
Select the used COM port under Port.
Find COM interface:
Windows 10: Settings > Devices (Bluetooth and other devices) > select
the MMS-Inspection gage in the section "Further Devices" > Further Blue-
tooth Options > COM ports. You will find the COM-port in the line “Direc-
tion Outgoing”
Older Windows versions: In the Device Manager, in the directory "Ports
(COM & LPT)", you will find the name of the COM port in brackets to
which the gage is connected.
c Save the settings: OK.
The connection settings are finished.
What you can do next
Transfer data, see page 52.
To Next Page
Loading...
