Flexim PIOX S72 Series User Manual

21 Settings
PIOX S72* 21.6 Working with parameter records
193
UMPIOX_S72xV1-9EN, 2022-05-15
21.6 Working with parameter records
21.6.1 Introduction
Parameter records are data sets that contain all information necessary to perform a certain measurement task:
• pipe parameters
• transducer parameters
• fluid parameters
• output options
Working with parameter records will make repeated measurement tasks easier and faster. The transmitter can store max.
20 parameter records.
The parameters have first to be entered in the program branches Parameters, Options and Special functions.
Afterwards, they can be stored as parameter record.
• Select the menu item Param. record memo.
• Press ENTER.
•Select Save current record.
• Press ENTER.
• Enter the name the parameter record has to be stored with.
• Press ENTER.
21.6.2 Load of a parameter record
Stored parameter records can be loaded and used for measurement.
• Select the menu item Load param. record.
• Press ENTER.
• Select the parameter record to be loaded.
• Press ENTER.
21.6.3 Deletion of parameter records
• Select the menu item Delete param. record.
• Press ENTER.
• Select the parameter record to be deleted.
• Press ENTER.
Notice!
No parameter records are stored in the delivery state. Parameter records have to be entered manually.
Special functions\Param. record memo.
Special functions\Param. record name
Special functions\Param. record memo.\Load param. record
Special functions\Param. record memo.\Delete param. record

Flexim PIOX S72 Series Specifications

General

Brand	Flexim
Model	PIOX S72 Series
Category	Measuring Instruments
Language	English