21 Settings
21.7 Contrast settings PIOX S72*
2022-05-15, UMPIOX_S72xV1-9EN
194
21.7 Contrast settings
• Select the menu item System settings in the program branch Special functions.
• Press ENTER.
• Select the menu item Display contrast.
• Press ENTER.
The display contrast is adjusted with the following keys:
increases the contrast
reduces the contrast
• Press ENTER.
21.8 HotCodes
A HotCode is a digit sequence that activates certain functions and settings.
• Press for several seconds to return to the beginning of the program branch.
• Press C.
• Enter the HotCode via the keyboard. It is not displayed during the input.
Language selection
The language selection can either be carried out in the program branch Special functions or by entering a HotCode:
After the last digit has been entered, the main menu is displayed in the selected language. The selected language remains
activated when the transmitter is switched off and on again.
Special functions\System settings\Display contrast
After an initialization of the transmitter, the display is reset to medium contrast.
function HotCode
display setting to medium contrast 555000
language selection 9090xx
initialization 909000
activation/deactivation of the flow direction detection 007026
activation/deactivation of the pig detection 007028
display of totalizers in the lower line as well 007032
language HotCode
English 909044
German 909049
French 909033
Spanish 909034
Dutch 909031
Russian 909007
Polish 909048
Turkish 909090
Italian 909039
To Next Page
Loading...
Need help?
General
