9 Start-up
PIOX S72* 9.7 Date and time
99
UMPIOX_S72xV1-9EN, 2022-05-15
It will be requested whether the initial settings are to be carried out.
If Yes is selected, the following setting dialogs will be displayed.
•Language
•Date/time
•Units of measurement
•Delete meas. values
•Delete snaps
• Delete user subst. (all customized materials and fluids which were stored after delivery will be deleted)
•Reset totalizers
The initialization can also be started with the HotCode 909000.
9.7 Date and time
The transmitter has a battery-powered clock. Measured values are automatically stored with date and time.
• Select the menu item Date/time.
The adjusted time is displayed.
• Enter the current time.
• Press ENTER.
The adjusted date is displayed.
• Enter the current date.
• Press ENTER.
9.8 Information regarding the transmitter
• Select the menu item Transmitter info.
• Press ENTER.
• Press or to scroll through the list.
• Press to return to the menu item System settings.
The following information relating to the transmitter is displayed:
Initial settings
Special functions\System settings\Date/time
Special functions\System settings\Transmitter info
display description
Product name designation of the transmitter
Serial number serial number of the transmitter
Firmware version version number of the installed firmware
Firmware date creation date of the installed firmware
Production date manufacturing date of the transmitter
MAC address MAC address of the transmitter
Service TCP port TCP port of the transmitter
Verification log state of the verification logger
To Next Page
Loading...
Need help?
General
