6 Transport and storage
PIOX S72* 6.1 Transport
25
UMPIOX_S72xV1-9EN, 2022-05-15
6 Transport and storage
6.1 Transport
The measuring equipment must be packaged properly for transport. For weight indications, see technical specification.
• Use, if possible, the original packaging by FLEXIM or an equivalent cardboard box.
• Position the transmitter, transducers and accessories in the middle of the cardboard box.
• Fill any voids with appropriate packaging material (e.g., paper, foam, bubble wrap).
• Protect the cardboard box against humidity.
6.2 Storage
Store the measuring equipment in a dry place.
When packaging, the transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during packaging.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
When lifting, the center of gravity of the transmitter can be displaced within the cardboard box. The
transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during transport.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
To Next Page
Loading...
Need help?
General
