6.4 Changing level & span
6.4.1 Changing the level
ActionStep
Press the joystick to display the horizontal menu bar.
1
If the camera is in continuous adjust mode, point to Manual adjust on the
Image menu and press the joystick.
2
Change the level by moving the joystick up/down. An arrow pointing upwards
or downwards will be displayed.
3
Press the joystick to leave level/span mode.
4
NOTE: You can also change the level by pointing to Level/Span on the Image menu, and then change
the level by moving the joystick up/down.
SEE ALSO: For more information about level, see section 9.2.4.3 – Level/Span on page 46.
6.4.2 Changing the span
ActionStep
Press the joystick to display the horizontal menu bar.
1
If the camera is in continuous adjust mode, point to Manual adjust on the
Image menu and press the joystick.
2
Change the span by moving the joystick left/right. Two arrows pointing away
from each other or towards each other will be displayed.
3
Press the joystick to leave level/span mode.
4
NOTE: You can also change the span by pointing to Level/Span on the Image menu, and then change
the span by moving the joystick left/right.
SEE ALSO: For more information about span, see section 9.2.4.3 – Level/Span on page 46.
6.5 Changing system settings
6.5.1 Changing the language
ActionStep
Press the joystick to display the horizontal menu bar.
1
Point to Local settings on the Setup menu and press the joystick.
2
Move the joystick up/down to select Language.
3
6.4 – Changing level & span
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004 13
To Next Page
Loading...
Need help?
General
