ActionStep
The wizard has now found a driver for the device.
Click Next.
7
The next wizard window is displayed: Microsoft has not digitally signed the
driver.
Click Yes to continue.
8
The wizard copies the necessary driver files to your system.
9
The driver installation procedure is completed.
Click Finish.
10
Reboot your computer if prompted to do so.
11
7.2.3.3 USB Driver Installation Procedure for Microsoft Windows ME
ActionStep
When the system has detected the ThermaCAM, the Windows has found the
following new hardware: FLIR ThermaCAM. What would you like to do?
window appears.
Select Specify the location of the driver.
1
Click Next.
2
■
Select Search for the best driver for your device
■
Clear Removable media
■
Select Specify a location
■
Click Browse and locate folder “C:\Program Files\FLIR Systems\Device
drivers”
■
Click Ok
3
Click Next.
4
Click Next.
5
If you get version conflict questions, click Yes.
6
Click Finish.
7
Reboot your computer if prompted to do so.
8
7.2 – Installation
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004 21
To Next Page
Loading...
Need help?
General
