EasyManua.ls Logo

FLIR ThermaCAM P20 - Temperature Ranges; Electrical Power System; Environmental Specifications

FLIR ThermaCAM P20
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14.4 Temperature ranges
-40–+120 °C (-40–+248 °F)
-10–+55 °C (+14–+131 °F)
0–+500 °C (+32–+932 °F)
NOTE: Depending on your camera
configuration, one of these ranges may be
disabled.
Temperature range, standard
Up to +1000 °C (+1832 °F)Temperature range, optional
± 2 °C/± 3.6 °F or ± 2 % of readingAccuracy
Set by number, or by selection in predefined listEmissivity correction
Automatic, based on input from distance, at-
mospheric temperature, and relative humidity.
Atmospheric transmission correction
Automatic, based on signals from internal sen-
sors
Optics transmission correction
YesReflected ambient temperature correction
YesExternal optics correction
14.5 Electrical power system
Rechargeable Li/Ion batteryBattery type
1.5–2 hours. Display shows battery statusBattery operating time
In camera (AC adapter) or stand-alone 2-bay
charger
Battery charging
AC adapter, 90–260 VAC, 50/60 Hz, 12 VDC outAC operation
9–16 VDC (11–16 VDC when charging)Voltage
User-selectable:
automatic shut-down
stand-by
sleep and
deep-sleep mode
Power management
14.6 Environmental specifications
-15–+50 °C (+5–+122 °F)Operating temperature range
66 Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
14.4 – Temperature ranges

Table of Contents

Related product manuals