FLIR ThermaCAM P20 User Manual

ActionStep
Move the joystick left/right to change the language.
4
Press the joystick to confirm your changes and leave the dialog box.
NOTE: Changing the language will make the camera restart the camera
program. This will take a few seconds.
5
6.5.2 Changing the temperature unit
ActionStep
Press the joystick to display the horizontal menu bar.
1
Point to Local Settings on the Setup menu and press the joystick.
2
Move the joystick up/down to select Temp unit.
3
Move the joystick left/right to change the temperature unit.
4
Press the joystick to confirm your changes and leave the dialog box.
5
6.5.3 Changing the date format
ActionStep
Press the joystick to display the horizontal menu bar.
1
Point to Local Settings on the Setup menu and press the joystick.
2
Move the joystick up/down to select Date format.
3
Move the joystick left/right to change the date format.
4
Press the joystick to confirm your changes and leave the dialog box.
5
6.5.4 Changing the time format
ActionStep
Press the joystick to display the horizontal menu bar.
1
Point to Local Settings on the Setup menu and press the joystick.
2
Move the joystick up/down to select Time format.
3
Move the joystick left/right to change the time format.
4
Press the joystick to confirm your changes and leave the dialog box.
5
14 Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
6.5 – Changing system settings

FLIR ThermaCAM P20 Specifications

General

Brand	FLIR
Model	ThermaCAM P20
Category	Thermographic Cameras
Language	English