Figure 9.37 Explanations of the Local settings dialog box
ValueLabel
Configuration-dependent
NOTE: The camera program will be restarted when you change
the language. This will take a few seconds.
Language
■
NTSC
■
PAL
Video output
■
°C
■
°F
Temp unit
■
Feet
■
Meters
Distance unit
■
YYYY-MM-DD
■
YY-MM-DD
■
MM/DD/YY
■
DD/MM/YY
Date format
■
24 hour
■
AM/PM
Time format
9.2.5.7 Camera info
The Camera info dialog box shows information about memory usage, battery
status, serial numbers, software revision etc. No changes can be made.
9.2.5.8 Factory default
Point to Factory default and press the joystick to reset the camera to the factory
settings.
NOTE: The camera will be restarted when you restore factory settings. This will take a few seconds.
54 Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
9.2 – Menu system
To Next Page
Loading...
Need help?
General
