FLIR ThermaCAM P20 - File Menu; Open; Save; Directories

■
Move the joystick right/left to move right/left in menus and submenus, and to
change values in dialog boxes
9.2.2 File menu
10389303;2
Figure 9.6 File menu
9.2.2.1 Open
10389403;3
Figure 9.7 Open dialog box
Point to Open and press the joystick to open or recall previously saved images
from the disk. The command displays a list box at the bottom of the screen,
showing the name of the image being displayed and the directory in which the
image file is stored.
■
To move between the left and the right pane, press the S button
■
To select another directory or image, move the joystick up/down
■
To open a subdirectory, move the joystick left/right
9.2.2.2 Save
Point to Save and press the joystick to save the displayed image to the Compact-
Flash card.
SEE ALSO: For more information about saving images, see section 9.2.5.2 – Save on page 49.
9.2.2.3 Directories
10389503;3
Figure 9.8 Directories dialog box
9.2 – Menu system
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004 41