Fluke DTX-MFM2 - Smart Remote Mode Autotest Results

DTX Series CableAnalyzer
Technical Reference Handbook
7-24
Smart Remote Mode Autotest Results
The Summary screen appears when the test is finished. To
see more detailed results, use
D to highlight a
measurement; then press
H.
Figure 7-11 describes the Summary screen and loss results
screen for an unsaved, single-directional Autotest in Smart
Remote mode.
For bi-directional results in Smart Remote mode, see
“Bi-Directional Testing” on page 7-42.
amd26f.eps
Figure 7-11. Smart Remote Mode Summary and Loss Result Screens (unsaved, single-directional)
1
3
7
4
5
6
8
2