Fluke DTX-MFM2 Technical Reference Handbook

11-1
Chapter 11
Custom Test Settings
You can customize the following test settings:
• Twisted pair cable types
• Fiber optic cable types
• Twisted pair test limits
• Fiber optic test limits
• Outlet configurations for twisted pair cable
• NVP for twisted pair or coaxial cable
Creating a Custom Twisted Pair Cable
Type
You can create up to nine custom twisted pair cable types.
A custom twisted pair cable type includes the following
settings:
• Custom cable name
• Baseline cable type for default values
• Nominal velocity of propagation (NVP)
To create a custom twisted pair cable type:
Turn the rotary switch to SETUP; then select Twisted Pair.
1 Select Cable Type; then select Custom.
2 Press J Create.
-continued-

Fluke DTX-MFM2 Specifications

General

Brand	Fluke
Model	DTX-MFM2
Category	Control Unit
Language	English