13-1
Chapter 13
Maintenance and Specifications
Maintenance
W
X
Warning
To avoid possible fire, electric shock, personal
injury, or damage to the tester:
² Do not open the case. No user-serviceable parts
are inside.
² Replacing electrical parts yourself will void the
tester's warranty and might compromise its safety
features.
² Use only specified replacement parts for user-
replaceable items.
² Use only Fluke Networks authorized service
centers.
WCaution
Replacing electrical parts yourself might void the
tester's calibration and compromise its accuracy. If
the calibration is void, cable manufacturers might
not extend their warranty to the cabling you
install.
Reference Procedure for Link Interface Adapters
The reference procedure sets a baseline for various
measurements. You should perform the reference
procedure every 30 days or whenever you start using the
tester with a different remote.
See “Setting the Reference” on pages 3-1 for twisted pair
cable and 5-1 for coaxial cable.
To Next Page
Loading...
Need help?
General
