Fluke DTX-MFM2 - Formatting a Memory Card (DTX-1800, DTX-1200) or Internal Memory; Memory Card Care (DTX-1800, DTX-1200)

Memory Functions
Formatting a Memory Card (DTX-1800, DTX-1200) or Internal Memory
12-9
12
Formatting a Memory Card (DTX-1800,
DTX-1200) or Internal Memory
Formatting erases all contents of the memory card or
internal memory.
To format a memory card or internal memory:
1 For a memory card, insert the card into the slot on the
left side of the tester.
2 Turn the rotary switch to AUTOTEST.
3 Press L Memory.
4 For a DTX-1800 or DTX-1200 with a memory card
installed, press J to select the memory card or
internal memory.
5 Press K Format; then press L Yes.
You can also format a memory card or internal memory in
SPECIAL FUNCTIONS mode:
1 Turn the rotary switch to SPECIAL FUNCTIONS.
2 Use D to highlight Memory Status; then press
H.
For a DTX-1800 or DTX-1200 with a memory card
installed, press J to select the memory card or
internal memory.
3 Press K Format; then press L Yes.
Memory Card Care (DTX-1800, DTX-
1200)
Clean the card by wiping it with a slightly damp cloth. If the
card’s electrical contacts are dirty, use a pencil eraser to
clean them.
Keep the card out of direct sunlight and away from
extreme heat or humidity.
Do not drop the card on hard surfaces.
Keep the card dry.