Certifying Twisted Pair Cabling
Twisted Pair Autotest Results
3-11
3
Automatic Diagnostics
If an Autotest fails, press J Fault Info for diagnostic
information about the failure. The diagnostic screens show
likely causes of the failure and suggest actions you can take
to solve the problem. A failed test may produce more than
one diagnostic screen. In this case, press ADBC
to see additional screens.
Figure 3-6 shows examples of diagnostic screens.
amd75f.eps
Figure 3-6. Examples of Automatic Diagnostic Screens
To Next Page
Loading...
Need help?
General
