Fluke DTX-MFM2 - DTX Series Cableanalyzer Technical Reference Handbook

DTX Series CableAnalyzer
Technical Reference Handbook
3-4
Table 3-1. Twisted Pair Test Settings (cont.)
Setting Description
SETUP > Twisted
Pair > Outlet
Configuration
The Outlet Configuration setting determines which cable pairs are tested and which pair numbers are
assigned to the pairs. To see the wire map for a configuration, press
J Sample from the Outlet
Configuration screen. Selecting Custom lets you create a configuration. See page 11-1 for details.
T568A T568B USOC (1 or 2 Pair)
Token Ring
ATM/TP-PMD Straight
ATM/TP-PMD
Crossed
Ethernet
Ethernet Crossed
1 white/green
2 green
3 white/orange
4 blue
5 white/blue
6 orange
7 white/brown
8 brown
12
3
4
1 white/orange
2 orange
3 white/green
4 blue
5 white/blue
6 green
7 white/brown
8 brown
13
2
4
3 white/orange
4 blue
5 white/blue
6 orange
12
3 white/green
4 blue
5 white/blue
6 green
13
1 white/green
2 green
7 white/brown
8 brown
1
2
2
1
1
2
7
8
7
8
1
2
white/green
green
white/brown
brown
1 white/orange
2 orange
3 white/green
6 green
3
2
3
2
1
2
3
6
3
6
1
2
white/orange
orange
white/green
green