DTX Series CableAnalyzer
Technical Reference Handbook
7-54
Figure 7-28. Power Meter Screens
amd106f.eps
amd107f.eps
A
Meters showing the power readings taken at each
wavelength. The tester takes one measurement for each
wavelength.
B
Power readings in decibels (dB) or microwatts (μw).
C
To switch between decibels and microwatts, press J.
A
Meter showing the power reading. The reading updates
continuously until you press I.
B
To switch between decibels and microwatts, press J.
C
To switch wavelengths, press L Change λ.
1
2
2
3
Unsaved results for SINGLE TEST mode with Smart
remote configuration (Input Fiber shown)
2
3
Results for MONITOR mode
1
To Next Page
Loading...
