Tutorials on Setup and Test Procedures
Certifying Twisted Pair Cabling
2-5
2
Figure 2-2. Equipment for Certifying Twisted Pair Cabling
amd40f.eps
A
Tester and smart remote with battery packs
B
Memory card (optional)
C
Two ac adapters with line cords (optional)
D
For testing permanent links: two permanent link
adapters
E
For testing channels: two channel adapters
Note
To run an Autotest without connecting to cabling,
you may connect the tester and remote together
with a permanent link and a channel adapter or
two channel adapters and a patch cord.
1
2
3
4
5
TEST
LOW BATTERY
TONE
TALK
FAIL
TEST
PASS
TALK
TALK
MONITOR
ENTER
TEST
SAVE
SPECIAL
FUNCTIONS
SETUP
AUTO
TEST
SINGLE
TEST
EXIT
F1 F2 F3
To Next Page
Loading...
