Tutorials on Setup and Test Procedures
Certifying Fiber Cabling
2-13
2
Figure 2-7. Equipment for Testing in Smart Remote Mode (Method B)
amd46f.eps
A
Tester and smart remote with fiber modules. Use
DTX-MFM2 modules for testing multimode fiber. Use
DTX-GFM2 modules for testing multimode fiber for
Gigabit Ethernet applications. Use DTX-SFM2 modules
for testing singlemode fiber.
B
Memory card (optional)
C
Two ac adapters with line cords (optional)
D
Reference test cords. Match the fiber to be tested. Long
ends must have SC connectors. For the other connectors,
match the connectors in the link.
E
Two mandrels. Recommended when testing multimode
fiber with DTX-MFM2 modules. See page 7-11.
F
Fiber cleaning supplies
Note
To run an Autotest without connecting to cabling,
you may connect the tester and remote together
with an SC/SC reference test cord.
To Next Page
Loading...
