1.13.4. Filling the installation report and warranty passport
The Installation Report (see next page) must be filled by the technician responsible for the installation.
The following to be filled in:
Address of the Customer and telephone number
Serial numbers involving:
• System /(master) control
• Generator, tube housing assembly (THA) and high voltage (HV) generator
• Collimator, beam limiting device (BLD)
• Column
Address of the Dealer and telephone number:
Name, date and signature of:
• Customer
• Technician
Identification labels are placed on the unit as indicated.
The operator must ensure the safety and reliability of the system by conducting regular inspections covering all the
functionality at least once a year. Furthermore, after 4, 7, 10 years and then every two years, a trained technician
should perform a maintenance inspection. The results of annual inspections / maintenance must be reported on the
inspection form provided at the end of the Maintenance Manual.
To Next Page
Loading...
