PostBase One Franking System
112
• Close the flap.
Note
: If the flap cannot be closed correctly,
adjust the position of the hoses by gently
turning the black handles on the connection
pieces.
Calibration / cleaning After changing the print heads,
PostBase One calibrates the print heads and
cleans the printing system. Please wait until
the calibration has finished.
Adjustment PostBase One continues with the print head
adjustment procedure and prompts you to
feed a letter for a test imprint. Follow the
instructions on the display.
For detailed information on the adjustment
procedure, please read chapter 15.6 on
page 116.
To Next Page
Loading...
