Fuji Electric FRENIC MEGA G2 Series - Page 191

5.2 Function Code Tables
5-7
FUNCTION CODES
Chap 5
Function
code
Name
Control method and Data setting range
Change
when running
Data copying
Factory
default
Related page
F60
Terminal [FM2]
(Output gain)
0 to 300%
Y*
Y
100
F61
(Function selection)
*Same as F31
Y
Y
2
F62
(Filter)
0.00 to 5.00 s
Y
Y
0.00
F63
(Bias)
-100.0 to 100.0%
Y*
Y
0.0
F64
Terminal [FMP] (Filter)
0.00 to 5.00 s
Y
Y
0.00
5-115
F80
HHD/HND switching
0: HHD specification
1: HND specification
N
Y
0
5-135
*10: 6.00 s for FRN0115G2S-2G/FRN0060G2-4G or lower inverters, 20.00 s for FRN0146G2S-2G/FRN0075G2-4G or higher inverters
*11: 5.0 min for FRN0115G2S-2G/FRN0060G2-4G or lower inverters, 10.0 min for FRN0146G2S-2G/FRN0075G2-4G or higher inverters
*12: 180% for FRN0075G2S-2G/FRN0038G2-4G or lower inverters, 160% for FRN0088G2S-2G/FRN0045G2-4G or higher inverters
*13: 0 for FRN0046G2S-2G/FRN0023G2-4G or lower inverters, OFF for FRN0059G2S-2G/FRN0031G2-4G or higher inverters