Fuji Electric FRENIC MEGA G2 Series - Page 25

1.1 Acceptance Inspection (Nameplate and Inverter Type)
1-1
BEFORE USE
Chap 1
1.1 Acceptance Inspection (Nameplate and Inverter Type)
Unpack the package and check the following:
(1) The package contains both the inverter unit and instruction manual (Simplified Edition), and the product has
suffered no damage (breakage, dents, parts that have fallen off) during transport.
(2) The rating plate is affixed to inverter at the location shown in Fig. 1.2-1.) Ensure that the product is the same
as the one ordered.
(a) Main Nameplate
(b) Sub Nameplate
Fig. 1.1-1 Nameplates
TYPE: Inverter type
-
Code Code Destination/Manual
FRN G Global/English
3-phase 200 V series Code Input power source
2 3-phase 200V
HHD kW (HP) HND kW (HP) 4 3-phase 400V
0003 0.4 (1/2) -
0005 0.75 (1) - Code Enclosure
～
～
- S Standard (basic type)(IP20/IP00)
0018 3.7 (5) - E EMC filter built-in type
0032 5.5 (7.5) 7.5 (10)
0059 11 (15) 15 (20)
～
～
～
Code Order of development
0346 75 (100) 90 (125) 2 2
0432 90 (125) 110 (150)
Code Applicable range
3-phase 400 V series G
High performance,
multifunctional type
HHD kW (HP) HND kW (HP)
0002 0.4 (1/2) -
0003 0.75 (1) -
～
～
-
0009 3.7 (5) -
0018 5.5 (7.5) 7.5 (10)
0031 11 (15) 15 (20)
～
～
～
1170 500 (800) 630 (900)
1386 630 (900) 710 (1000)
Applicable motor rating
Series name
FRENIC series
Code
Code
Applicable motor rating
2
G
FRN
0003
G
2
S
Fig. 1.1-2 Inverter type
The inverter types indicated in all tables in this manual are expressed in the form “FRN****G2□-2G,
FRN****G2□-4G”.